A leveling kit may be the answer you’ve wanted to get rid of that ugly rake in your Chevy 2500HD. But while there are several different kits to choose from, you should educate yourself on the different types available, their benefits, and potential drawbacks. In this article, I will go through some problems you may encounter when using a leveling kit in your Chevy truck.
What is a Leveling Kit?
If you have a chevy truck that is either lifted or lowered, you may have noticed that your suspension is not performing as it should. This is because the suspension components are no longer set up properly.
A leveling kit can help fix these issues by bringing your vehicle back to factory height. A leveling kit can be used to level out an uneven stance, increase ground clearance, or put bigger tires on a lifted truck.
It will also allow you to adjust the stock ride height so you can have a smoother ride and better handling characteristics. If you have a 4×4 truck, there is a good chance that it has been lifted by several inches.
This creates an unstable ride when going over bumps or driving on uneven terrain. A leveling kit allows you to bring the vehicle back down to factory height so it can handle better on-road conditions, but not affect off-road performance at all.
The most common type of leveling kit is called coil spacers and they work by adding length between each coil spring and shock absorber. The spacers are made from either rubber or polyurethane material so they won’t affect ride quality at all when installed correctly! Coil spacers are available in different sizes depending on how much lift.
The purpose of a leveling kit is to level out the stance of your vehicle. This can be done for aesthetic reasons, but it’s often done for functionality as well. A leveling kit can be used to increase ground clearance, which makes it easier for you to drive through deep mud, snow or water without getting stuck.
Chevy 2500hd Leveling kit Problems
A leveling kit can help improve handling and ride quality by increasing clearance from the ground. It also allows you to install larger tires on your truck, which can make it easier to tow heavier loads or go offroad easily. However, there are some downsides to using a leveling kit on your Chevy 2500HD Truck.
Here are common problems that you may encounter after installing one on your chevy:
Can negatively impact the upper control arms
Leveling kits add weight to your vehicle. The additional weight reduces the amount of load-bearing capacity that your suspension system is capable of holding up. This can cause premature wear on components like your upper control arms, which connect your suspension at each end of the axle shafts.
The upper control arm is an important component in the front suspension system of a truck. It connects the lower control arm to the frame of your vehicle and provides support for your front axle. Theoretically, it’s possible that a leveling kit could negatively impact this component and reduce its effectiveness. This would have an adverse effect on your truck’s handling and safety.
Slightly Alters Driveline Angles
Leveling kits don’t raise trucks as much as they used to because modern trucks have more sophisticated suspension systems than older models did.
But even though they don’t raise trucks as high as before, they still alter driveline angles slightly can alter driveline angles and potentially cause damage to drivetrain components such as drive axles, transfer cases and more if not done properly by a professional mechanic with experience installing leveling kits.
In addition, this may also impact overall fuel economy if you don’t compensate for these changes by adjusting tire pressure accordingly or adding more gear oil (if necessary).
Impact on Overall Fuel Economy
It’s no secret that when you lift your vehicle, it can adversely affect your gas mileage. In fact, if you go over 2 inches of lift, some studies have shown an impact on the fuel economy of up to 20%. That’s a lot of money being spent at the pump!
Increased Wear and Tear on Suspension
One of the main concerns with raising a truck too much is that it puts more stress on the suspension components than they were designed for.
This can lead to premature wear and tear that can cause expensive repairs down the road. 3. Compromised ride quality when you want more lift
You might think that raising a truck would give you better ground clearance and make it easier to traverse rough terrain, but this isn’t necessarily true for all situations.
If you want better on road performance but also want to maintain good handling characteristics, then a leveling kit may be your best option because it keeps things level while still providing an increase in ground clearance.
Tomas is a retired Chevy Auto Technician that brings decades of hands-on experience and expertise to the table. He’s also a father to two incredible daughters. He enjoys using his knowledge and experience to help you solve and find reliable information on Chevrolet vehicles. Whether it’s troubleshooting engine problems or providing tips for maintenance, Thomas is committed to helping Chevy owners keep their vehicles running smoothly and safely.
